Bont Short Track

Platinum k390

The Bont Platinum blade is made with K390 powder metal tool steel. It holds its edge up to 8 times longer than normal steel blades. The powder metal structure is very fine which gives exceptional gliding properties. The platinum blade is laser cut and hardened in Australia and glue and machined in Holland.

The blades can be ordered straight or bent. We also offer them in KR and Half KR spec which have the mounting set back 2cm and 1cm respectively on the blade. The sizes that we always keep in stock are:

Other sizes need to be special ordered and take approximately 6 weeks to produce.

S = Straight
B = Bent
KR = Mounting set back 2cm
1/2 KR = Mounting set back 1cm

Features

Acrinalyn Series aluminum tube

K390

Blade hardened to 64 Rockwell

Blades come with standard 9 meter radius

Maximum length - 18''

Aluminum Cups

Blades can be ordered straight or machine bent

Blades come in standard thickness of 1.1

Spec-R

The Spec-R is our mid range blade. It combines a quality 6061 aluminum tube with extremely high quality Japanese steel. The steel is hardened to 58 Rockwell. These blades have a slight bend cut in the tube for the steel so that you only need to slightly bend your blades. This means that the tube has less stress and less chance of it losing its bend like normal blades.

Features

Blade 58 Rockwell Japanese steel

6061 aluminum tube

Standard 1.2mm thickness

Blade Lengths: 14'', 15", 15.5", 16", 16.5", 17"

Standard radius of 9m

Exceptionally fine gliding blade

6061 aluminum brackets

Blades come machine bent

sonic 1000

The Sonic 1000 is our entry level blades. They are made with a high quality aluminum extrusion. They are pre bent so new skaters can get skating immediately without any knowledge of how to bend their blades.

Features

High performance entry level blade

Blade 58 Rockwell

Standard 1.2mm thickness

Maximum length - 16.5''

Minimum length 8'', standard for boots under and inc: 13.5 - 32 is 12''

Blades to match boots from 9-27 to 13.5-32 will have 5.5'' mounting separation

Standard radius of 8m short track and 21m long track

Brackets are 30mm - 40mm

Exceptionally fine gliding blade

Standard aluminum brackets

Blades come machine bent