Jet

the world’s most popular speed skate

A boot that lacks support absorbs your energy rather than transferring it into forward motion. That's why we build all our skates with more support than most long track boots on the market. The boots are made with a heatmoldable thermoset plastic which makes the boot extremely moldable. We also offer the range of boots in custom made. All our boots are made in one piece by hand.

  • Jet Black
  • Jet White

Click on images above

Anti Stretch

Between the outer skin and the liner we add a material that is proprietary to Bont to stop the boot from stretching over time. This material has similar strength characteristics to Kevlar. This material is stitched to the outer skin and bonded to the liner so it can never move or be removed, it becomes part of the boots structure. This layer is the reason that Bont boots do not stretch out as much as other brands of boots over time.

Anti Stretch

Carbon Fiber

We source our carbon exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Vaypor is made by hand by sandwiching cross weave carbon and uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear.

Last Design

A last is a plastic replica of a foot that the boot is built around. Last makers do not make skate lasts, they only make shoe lasts so perfecting a speed skating last is not an easy prospect. At Bont, we have been perfecting our lasts since 1975 and the process is ongoing. We feel that we put more effort into our last than any other skating brand and it is the reason that Bont boots fit more skaters than any other brand on the market.

Last Design

Padding

The Jet is designed for high class athletes so the padding used is a thin, dense padding that is quite unforgiving. The padding is harder than our previous generations of Jet and it is also lighter. Like all Bont padding, we use a closed cell memory foam that will not retain water. If you are after a more comfortable ride, please select one of our softer padding options.

Padding

Heat Moulding

Bont inline boot is the most heat moldable shoes available. Bont's proprietary resin has been developed and perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. Unlike other shoes which are moldable only in select locations, all Bont inline boots are able to be molded over the entire chasis providing cyclist not only with the most anatomically designed cycling shoe on the market today, but also with the ability to fine tune the fit of the entire shoe to give a customised fit.

Specification

Model Jet
Base Carbon Composite
Outer Skin Microfiber or Shiny Microfiber
Liner Microfiber
Pitch 12mm
Innersole EVA thermo-moldable
Heat Moldable Fully Heat Moldable Base Utilizing Epoxy Thermoset Resin
Padding Soft Density Memory Foam
Buckle Microadjustable
Size Options 3 - 13
Fit Options Standard, Narrow, Wide
Custom Made Can be ordered custom made
Short Track

Welcome to the Bont Size Wizard

The best way to find out what BONT size you are is to try one on.

If you are unable to do this, please get the right BONT size by following bont sizing wizard step by step.

Please prepare a piece of paper, a pen, a ruler, then click 'start' when you are ready

 

Welcome to the Bont Size Wizard

I don't know my EURO size
I know EURO size
Left Foot
Right Foot
Left Foot
Right Foot
Bont Size
*Note that this wizard is a guide and may not work with all feet.
 

Step1. Put a piece of paper against the wall

Step2. Place your heel to touch the wall

Step3. Place your toe at the longest distance from the wall

Step4. Mark the end of your toe on the paper

Step5. Mark the widest part of your foot on the paper

Step6. Then measure the length and width

Step7. Enter in your MM size in the box, then press the "GO"

Left Foot
mm
mm
Right Foot
mm
mm
Left Foot
Right Foot
Bont
Euro
*Note that this wizard is a guide and may not work with all feet.
Bont Laces-Optional color

Bont Laces-Optional color

Buy Now
Standard Buckle Kit

Bont Innersole for inline

Bont innersoles are made of heat moldable EVA. They are comfortable and thin so they don't take up too much space in your boot. The edges are curved and thin so that there is a seamless transition between the innersole and your boot liner.

Buy Now