Commuter one

Commuter one

The Bont commuter-one shoe is of a handmade carbon composite monocoque construction.

With its carbon composite construction, 4.4 mm stack height and Bont’s proprietary heat moldable resin for fit customisation, the Bont commuter-one shoe is undoubtedly one of the best commuter shoes currently available.

The commuter-one has been designed to maintain class leading stiffness for power transfer, yet with a built in roll factor to allow for times when walking & running of the bike is needed. In addition, the commuter-one has been designed with rubber protectors and grips in high-density rubber and are replaceable.

The commuter-one is available in stock colours of black in Matt Microfiber or Pink Shiny Microfiber upper. (Full range of colours available in Shiny Microfiber as special order)

  • Commuter one
  • Commuter one Outside
  • Commuter one Inside
  • Commuter one Top
  • Commuter one Front
  • Commuter one Base
  • Commuter one Back

Click on images above

Grip Plate

Sole has been designed to maximize grip and minimize retention of dirt & mud. Grip components are replaceable with spike mounts located in toe section.

Grip Plate

Buckle

Low profile, micro adjustable buckles have been fitted. Buckles and ladders are fully replaceable, with 3 lengths of ladders available to ensure proper fit.

Buckle

Replaceable Sole Guards

Replaceable sole guards have been designed for maximum grip and are replaceable.

Replaceable Sole Guards

Ventilation

The commuter one is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels.

Ventilation

Anti Stretch

Between the outer skin and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer skin and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke.

Anti Stretch

Last Design

A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, "We make shoes for cycling, not walking."

Last Design

Padding

Commuter-one is fitted with high density memory foam with dry cell technology to ensure mimimum water retention in wet conditions.

Padding

TPU Toe Protector

The toe protector not only protects the front area of the shoe from wheel rub and impact, but also houses ventilation holes for improving airflow through the shoe.

TPU Toe Protector

Heat Moulding

Bont cycling shoe is the most heat moldable shoes available. Bont's proprietary resin has been developed and perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. Unlike other shoes which are moldable only in select locations, all Bont cycling shoes are able to be molded over the entire chasis providing cyclist not only with the most anatomically designed cycling shoe on the market today, but also with the ability to fine tune the fit of the entire shoe to give a customised fit.

Medial Longitudinal Arch Support

Structural medial longitudinal arch support is provided in all models to stop over pronation of feet.

Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries.

In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain.

medial Longitudinal Arch Support

Anatomical Forefoot Shape

Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common "hot foot" sensation.

Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area.

Anatomical Forefoot Shape

Anatomical Heel Cup

The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation.

Anatomical Heel Cup

Lateral Forefoot Support

Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain.

Lateral Forefoot Support

Specification

Model commuter-one
Chassis material Carbon composite
Resin Epoxy Thermoset Resin
Upper Material Choice of Matt Microfiber or Pink Shiny Microfiber
Liner Material Non Porous Microfiber
Stack Height 4.4 mm
Air Vents 40 air vents on frontal area of shoe and air gills in arch area
Innersole EVA thermo-moldable
Sole Guards Replaceable
Padding Memory Foam
Heat Moldable Fully Heat Moldable Monocoque Chassis
Cleat Mounting MM grid plus grip
Closing Options 2 Velcro Straps + Buckle (Replaceable)
Weight 300 grams – 2 Velcro Straps + Buckle
Sizing Options Stock, Wide & Narrow Fit
Color Options Black, White, Pink
cycling

Welcome to the Bont Size Wizard

The best way to find out what BONT size you are is to try one on.

If you are unable to do this, please get the right BONT size by following bont sizing wizard step by step.

Please prepare a piece of paper, a pen, a ruler, then click 'start' when you are ready

 

Welcome to the Bont Size Wizard

I don't know my EURO size
I know EURO size
Left Foot
Right Foot
Left Foot
Right Foot
Bont Size
*Note that this wizard is a guide and may not work with all feet.
 

Step1. Put a piece of paper against the wall

Step2. Place your heel to touch the wall

Step3. Place your toe at the longest distance from the wall

Step4. Mark the end of your toe on the paper

Step5. Mark the widest part of your foot on the paper

Step6. Then measure the length and width

Step7. Enter in your MM size in the box, then press the "GO"

Left Foot
mm
mm
Right Foot
mm
mm
Left Foot
Right Foot
Bont
Euro
*Note that this wizard is a guide and may not work with all feet.
Standard Buckle Kit

Standard Buckle Kit

Need to replace your buckle? This buckle kit includes a pair of buckles, loop, a pair of 8cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles.

Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You can not replace a Standard buckle with a Slimline buckle.

Buy Now
Protective front bumper

Protective front bumper

This extremely durable and super light TPU protective bumper can provide extra protection and style for your shoes. Simply glue them on the outside of the shoes with Loctite 401.

A set of 2 bumpers (Left and Right)

Buy Now
Protective side bumper-standard

Protective side bumper-standard

This extremely durable and super light TPU protective bumper can provide extra protection and style for your skates. Simply glue them on the outside of the skates with Loctite 401.

A set of 2 bumpers (Left and Right)

Buy Now
Ladders

Ladders

A pair of standard ladders.

Buy Now
Standard Buckle Kit

Bont Innersole for cycling

Bont innersoles are made of heat moldable EVA. They are comfortable and thin so they don't take up too much space in your boot. The edges are curved and thin so that there is a seamless transition between the innersole and your boot liner.

Buy Now
Commuter/MTB Rubber & Screw Set

Commuter/MTB Rubber & Screw Set

Rubber for base of Commuter/MTB (Pack of 10 pieces)

Screw for rubber of the Commuter/MTB base (Pack of 20 pcs)

Buy Now
MTB t-nuts/plates(Gold)

MTB t-nuts/plates(Gold)

Buy Now