Sub 10

Sub 10

If you think all triathlon shoes are the same, it's time you take a look at the Bont Sub-10. This shoe offers you the stiffness of a $350 shoe with full heat moldability, at a fraction of the cost. The secret is in Bonts' unique hand layup with pressure wrap. We hand lay the fiberglass without any injection molding what-so-ever. Each strip of fiberglass is laid in the shape of a cross before being painted with resin. The shoe is then baked and once set, we are left with an extremely stiff, light weight, fully moldable shoe.

This shoe offers and extremely thin stack height of just 4.8mm and is available with a matt microfiber upper.

  • Sub 10
  • Sub 10 Outside
  • Sub 10 Inside
  • Sub 10 Top
  • Sub 10 Front
  • Sub 10 Base
  • Sub 10 Back

Click on images above

Cleat Micro Grid

The cleat micro grid has been included to provide riders with the ability to fine tune their cleat placement.

Cleat Micro Grid

Shoe Horn

Large shoe horn has been fitted for simple and fast entry into shoe.

Shoe Horn

Heel Protector

Heel guards have been designed to protect shoes through transition areas whilst maintaining maximum grip.

Heel Protector

Anti Stretch

Between the outer skin and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer skin and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke.

Anti Stretch

Last Design

A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, "We make shoes for cycling, not walking."

Last Design

Padding

Sub-10 is fitted with high density memory foam with dry cell technology to ensure mimimum water retention in wet conditions.

Padding

TPU Toe Protector

The toe protector not only protects the front area of the shoe from wheel rub and impact, but also houses ventilation holes for improving airflow through the shoe.

TPU Toe Protector

Heat Moulding

Bont cycling shoe is the most heat moldable shoes available. Bont's proprietary resin has been developed and perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. Unlike other shoes which are moldable only in select locations, all Bont cycling shoes are able to be molded over the entire chasis providing cyclist not only with the most anatomically designed cycling shoe on the market today, but also with the ability to fine tune the fit of the entire shoe to give a customised fit.

Medial Longitudinal Arch Support

Structural medial longitudinal arch support is provided in all models to stop over pronation of feet.

Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries.

In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain.

medial Longitudinal Arch Support

Anatomical Forefoot Shape

Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common "hot foot" sensation.

Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area.

Anatomical Forefoot Shape

Anatomical Heel Cup

The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation.

Anatomical Heel Cup

Lateral Forefoot Support

Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain.

Lateral Forefoot Support

Specification

Model sub-10
Chassis material Monocoque fiberglass base
Resin Epoxy Thermoset Resin
Upper Material White Matt Microfiber
Liner Material Non Porous Microfiber
Sole Guards Replaceable
Stack Height 4.8 mm
Air Vents 40 air vents on frontal area of shoe and air gills in arch area
Innersole EVA thermo moldable Innersole
Padding Memory Foam
Heat Moldable Fully Heat Moldable Monocoque Chassis
Cleat Mounting MM grid plus grip / 3 Hole Look Configuration
Customization Thermo moldable resin
Closing Options Single action velcro closure system
Weight 275 grams
Sizing Options Stock
Color Options White

此页面上的内容需要较新版本的 Adobe Flash Player。

获取 Adobe Flash Player

Protective front bumper

Protective front bumper

This extremely durable and super light TPU protective bumper can provide extra protection and style for your shoes. Simply glue them on the outside of the shoes with Loctite 401.

A set of 2 bumpers (Left and Right)

Buy Now
Protective side bumper-standard

Protective side bumper-standard

This extremely durable and super light TPU protective bumper can provide extra protection and style for your skates. Simply glue them on the outside of the skates with Loctite 401.

A set of 2 bumpers (Left and Right)

Buy Now
Toe & Heel Pad Set

Toe & Heel Pad Set

Rubber for base of shoe (Pack of 4 pieces)

Screw for rubber of the shoe base (Pack of 4 pieces)

Buy Now
Standard Buckle Kit

Bont Innersole for cycling

Bont innersoles are made of heat moldable EVA. They are comfortable and thin so they don't take up too much space in your boot. The edges are curved and thin so that there is a seamless transition between the innersole and your boot liner.

Buy Now
Road shoe T-nuts

Road shoe T-nuts

T-Nut (big one) for cleat of shoe base (Pack of 6 pieces), Or, T-Nut (small one) for rubber of shoe base (Pack of 4 pieces)

Buy Now